UltraTestWireless.com™

Precision Wireless Links™

Wireless
Test & Measurement

TM400 Systems

Ultra Test Wireless' TM400 wireless Test and Measurement systems allow you to use your favorite phantom powered measurement microphone wireless with Systune, EASERA, Smaart, TEF or any other test and measurement platform. The secret to the performance is their application of digital technology to eliminate the need for the companders used by all analog wireless systems. The companders while they increase the audible dynamic range don't allow the level of accuracy needed in a test system. By using Digital Hybrid technology from Lectrosonics we combine the best features of analog wireless like range, with greatly improved performance due to their patented digital technology.

The Ultra Test Wireless TM400 Digital Hybrid Test and Measurement system consists of a HM-TM Test and Measurement transmitter with a R400A receiver and a CCTM400 waterproof case. Packages without the case or with a precision test mic by SoundFirst, Josephson, or DPA are available.

The HM-TM is the Test and Measurement version of a plug-on transmitter that will convert any low impedance wired mic into a wireless mic. It can supply 5, 15 or 48 volt phantom power to mics that require phantom. If you have a phantom powered measurement microphone that you love but wished it was wireless, the HM-TM is your answer. You will get virtually the same measurement as when the mic was used wired.

Click for a manual on the HM-TM plug-on transmitter.

The R400A is an affordable single channel Digital Hybrid receiver.

Click here for a manual on the R400A single channel receiver.

If you only need one or two channels of receiver, then the R400A may be ideal for you. Download the TM400 Technical Data Sheet here.

Read the article from the Syn-Aud-Con newsletter on this system.

Email me for available packages including pricing and shipping.

Available on Frequency blocks 470, and 19 - 26. Click here for more information on blocks, frequencies, and TV channels.

TM500 Systems

Ultra Test Wireless' TM500 wireless Test and Measurement systems are upgraded single and dual channel wireless systems that allow you to use your favorite phantom powered measurement microphones wireless with Systune, EASERA, Smaart, TEF or any other Single or dual channel test and measurement platform. The secret to the performance is their application of digital technology to eliminate the need for the companders used by all analog wireless systems. The companders while they increase the audible dynamic range don't allow the level of accuracy needed in a test system. By using Digital Hybrid technology from Lectrosonics we combine the best features of analog wireless like range, with greatly improved performance due to their patented digital technology.

The Ultra Test Wireless TM500 Digital Hybrid Test and Measurement system consists of a HM-TM Test and Measurement transmitter with a SRa-TM receiver. Packages with precision test mics by SoundFirst, Josephson, or DPA are available.

The HM-TM is the Test and Measurement version of a plug-on transmitter that will convert any low impedance wired mic into a wireless mic. It can supply 5, 15 or 48 volt phantom power to mics that require phantom. If you have a phantom powered measurement microphone that you love but wished it was wireless, the HM-TM is your answer. You will get virtually the same measurement as when the mic was used wired.

Click for a manual on the HM-TM plug-on transmitter.

The SRa-TM is a deluxe dual and single channel Digital Hybrid receiver in a very compact size. Its dual tracking filter RF front end provides superior rejection of RF interference in today's crowded spectrum. In dual channel mode it provides SmartDiversity operation and in single channel mode it uses both receivers for Ratio Diversity. The SRa-TM is a distinct step up from our R400A receiver providing even better performance in a very small package.

The SRa-TM comes complete with audio outputs on TA3M connectors, adaptors to XLR, and AC power supply with locking cord. Options include a battery sled that runs the SRa-TM from a standard L or M type video camera rechargeable battery.

Click here for a manual on the SRa-TM dual channel receiver.

Email me for available packages including pricing and shipping.

Available on Frequency blocks 470, and 19 - 26. Click here for more information on blocks, frequencies, and TV channels. Please note with your order the block you wish.

TM600 Systems

Ultra Test Wireless' TM600 wireless Test and Measurement systems are upgraded multi-channel wireless systems that allow you to use up to 4 of your favorite phantom powered measurement microphones wireless with Systune, EASERA or any other multi-channel test and measurement platform. The secret to the performance is their application of digital technology to eliminate the need for the companders used by all analog wireless systems. The companders while they increase the audible dynamic range don't allow the level of accuracy needed in a test system. By using Digital Hybrid technology from Lectrosonics we combine the best features of analog wireless like range, with greatly improved performance due to their patented digital technology.

The Ultra Test Wireless TM600 Digital Hybrid Test and Measurement system consists of three or four HM-TM Test and Measurement transmitters with two SRa-TM receivers in a Quadpack. Packages with precision test mics by SoundFirst, Josephson, or DPA are available.

The HM-TM is the Test and Measurement version of a plug-on transmitter that will convert any low impedance wired mic into a wireless mic. It can supply 5, 15 or 48 volt phantom power to mics that require phantom. If you have a phantom powered measurement microphone that you love but wished it was wireless, the HM-TM is your answer. You will get virtually the same measurement as when the mic was used wired.

Click for a manual on the HM-TM plug-on transmitter.

The Quadpack holds two SRa-TM receivers in a small case with balanced outputs of all 4 channels on both XLR and TA3M connectors. It runs from one or two external DC sources with silent changeover for redundancy.

Email me for available packages including pricing and shipping.

Available on Frequency blocks 470, and 19 - 26. Click here for more information on blocks, frequencies, and TV channels. Please note with your order the block you wish.

Click here for a manual on the Quadpack.

TM800 Systems

Ultra Test Wireless' TM800 wireless Test and Measurement systems are upgraded multi-channel wireless systems that allow you to use up to 8 of your favorite phantom powered measurement microphones wireless with Systune, EASERA or any other multi-channel test and measurement platform. The secret to the performance is their application of digital technology to eliminate the need for the companders used by all analog wireless systems. The companders while they increase the audible dynamic range don't allow the level of accuracy needed in a test system. By using Digital Hybrid technology from Lectrosonics we combine the best features of analog wireless like range, with greatly improved performance due to their patented digital technology.

The Ultra Test Wireless TM800 Digital Hybrid Test and Measurement system consists of five to eight HM-TM Test and Measurement transmitters with up to four SRa-TM receivers in a Octopack. Packages with precision test mics by SoundFirst, Josephson, or DPA are available.

The HM-TM is the Test and Measurement version of a plug-on transmitter that will convert any low impedance wired mic into a wireless mic. It can supply 5, 15 or 48 volt phantom power to mics that require phantom. If you have a phantom powered measurement microphone that you love but wished it was wireless, the HM-TM is your answer. You will get virtually the same measurement as when the mic was used wired.

Click for a manual on the HM-TM plug-on transmitter.

The Octopack holds up to four SRa-TM receivers in a small case with antenna distribution, and balanced outputs of all 8 channels on TA3M connectors. It runs from one or two internal L or M style rechargeable batteries or on an external DC source with silent changeover for redundancy.

Email me for available packages including pricing and shipping.

Available on Frequency blocks 470, and 19 - 26. Click here for more information on blocks, frequencies, and TV channels. Please note with your order the block you wish.

Click here for a manual on the Octopack.

Individual components of these systems are available. Please email for further information.



Email me at Sales@AudioToolbox.US. I accept all major credit cards and eChecks through PayPal, or you may pay by Money Order sent to the address below.

Mailing address:
Ray A. Rayburn
1716 Main St Ste A #300
Longmont, CO 80501-7413
USA

Back to www.AudioToolbox.US Home Page.

Back to www.TEF20.com Home Page.

Back to www.Superlux.US Home Page.

Back to www.SoundFirst.com Home Page.

Back to my Technical Page.

Last Edited 10/15/2012

Entire Site Copyright 2006, 2007, 2008, 2010, 2011 & 2012 by Ray A. Rayburn. All rights reserved.
UltraTestWireless.com™, Precision Wireless Links™, Sound First™, SoundFirst.com™ Superlux.US™ AudioToolbox.US™ and TestMic.com™ are Trademarks of Ray A. Rayburn